Due to the inability of microwave physical ground penetrating radar to detect plastic pipes, which poses obstacles for future maintenance and other construction, metal wires are attached to the plastic pipes to provide response signs.

铜包钢是由钢芯线和细密包覆其外的铜层组成金属芯，外侧为PE防腐层，铜起到传导弱电信号的作用，钢丝则起到支持作用

。铜芯电线一样平常由内层的铜芯线、中心层的绝缘包皮和外层的；ね馄ぷ槌

。铜包铝由铝芯线和细密包覆其外的铜层组成金属芯，外层为PE防腐层

。

Copper clad steel is a metal core composed of a steel core wire and a tightly wrapped copper layer, with a PE anti-corrosion layer on the outermost side. Copper plays a role in conducting weak electrical signals, while steel wire plays a supporting role. Copper core wires are generally composed of the innermost copper core wire, the insulation sheath of the middle layer, and the protective sheath of the outermost layer. Copper clad aluminum consists of an aluminum core wire and a copper layer tightly wrapped around it to form a metal core, with the outermost layer being a PE anti-corrosion layer.

由于钢质燃气管道外层的防腐层为具有绝缘、防腐性能的塑料层或涂层，与铜包钢、铜芯电线、铜包铝等外层也为具有绝缘、防腐性能的塑料层结构相似

。因此，我们将两者等效，通过接纳PCM管道电流衰减率法[1]，对示踪线防腐层平均绝缘质量举行检测

。检测原理是向示踪线施加某一频率的电流信号，电流由示踪线向远方转达时会逐渐衰减

。其衰减巨细与示踪线的塑料层的绝缘电阻率有关，示踪线塑料层的平均绝缘电阻率越高，电流衰减就越慢，反之则衰减越快

。

Due to the fact that the outermost anti-corrosion layer of steel gas pipelines is a plastic layer or coating with insulation and anti-corrosion properties, similar in structure to the outermost plastic layer with insulation and anti-corrosion properties, such as copper clad steel, copper core wires, and copper clad aluminum. Therefore, we equate the two and use the PCM pipeline current decay rate method [1] to detect the average insulation quality of the trace line anti-corrosion layer. The detection principle is to apply a current signal of a certain frequency to the tracer line, and the current will gradually decay when transmitted from the tracer line to the distance. The magnitude of its attenuation is related to the insulation resistivity of the plastic layer of the tracer line. The higher the average insulation resistivity of the plastic layer of the tracer line, the slower the current attenuation, and vice versa, the faster the attenuation.

以上就是管道示踪线厂家为各人先容的内容，谢谢您在百忙之中审查我公司的信息内容，若是您想要相识的更多，接待您来电举行咨询!

The above is the content introduced by the pipeline tracing line manufacturer. Thank you for taking the time to check our company's information content If you want to learn more, welcome to call for consultation!